Archive for the ‘Welders’ Category

Comments Off on The rise of weld cleaning machines in Australia

When you look at any market, and specifically long established methods or practices within those markets, the biggest disruptions are born out of occupational health and safety concerns. Post weld cleaning and polishing of stainless steels has been practiced for decades using pickling pastes. These chemical based pickling paste products contain a combination of nitric […]

Comments Off on Pulse Mig Tig Welder Aluminium Projects At Home

Recently Andrew (T) provided feedback on his experience using the Metalmaster Pulse 250P Mig Welder and Elite 215 AC DC Pulse Tig Welder. Andrew shared images of his impressive projects.

“Just a bit of feedback for you guys. I just recently finished this 7.5 mtr Alloy boat Trailer using the 250 Pulse mig and 215 Elite tig. I’m happy to say both did a fantastic job I have been using these machines for a while now with no issues whatsoever, the tig has built dog crates boat canopies water tanks quad bike accessories in both Alloy and stainlesss steel. The mig did take a little while to fine tune but when I did what a powerful little machine that is, happy to say it’s equal to some very expensive brand names I use on

Comments Off on Electropolisher Machine Stainless Steel Weld Clean

Welding of stainless steels affects the chromium density of the surface which leads to poor appearance and subsequent corrosion when left untreated. There are a few way to clean up post weld and if you do a lot of stainless welding you want to avoid that nasty pickling paste process and invest in an electropolishing machine.

Why the machine, well, the best way to post-weld finish stainless steel is by electropolishing, which for those not in the know is an electrochemical process that rebuilds chromium throughout the weld surface by increasing it’s density and as a result restores the chromium’s ability to create an oxide film.

<img class="size-full wp-image-765" src="https://www.tokentools.com.au/wp-content/uploads/stainless-steel-weld.jpg" alt="stainless steel weld with heat affected zone that is lacking chromium oxide" width="317" height="227" srcset="https://www.tokentoo

Comments Off on 10 steps to follow when buying a TIG welder

10 step buying guide tig welder

 

About to considering buying a new TIG welder? Before you part with your hard earned, there are important and key points to know first.

 

  1. Transformer or Inverter

Until 2005 tran

Comments Off on Power 10 Gas Cylinders Swap and Go For Speedgas Bottles At Face Value
Now you can swap power10 welding gas cylinders for speedgas bottles on a 1 to 1 face value exchange

Now you can swap power10 welding gas cylinders for speedgas bottles on a 1 to 1 face value exchange

Great news for owners of Power 10 gas cylinders, now you can swap any Power 10 welding gas bottle for a S

Comments Off on Inverter Welder ARC TIG Miniarc 200ST

Demand for inverter welding machines and the competition in this segment of the market has never been greater and the consumer has the advantage with manufacturers bundling features in order to carve out their niche. To succeed in this segment we have launched our latest inverter welder development, the Metalmaster Miniarc 200ST aimed at the commercial segment with features that will impress and a price that will give you change from $400 and a 5 year warranty.

The Metalmaster Miniarc 200ST inverter welder features 3 modes of operation. MMA stick welding with VRD protection that can be deactivated to provide MMA Stick welding with an open circuit voltage of 70V DC. TIG welding is available using a tru lift arc start so even then stainless sheet or tube can be welded with ease. VRD mode output voltage is 15V DC and can significantly reduce the risk of injury when welding in hazardous locations.

 

<div id="attachment_701" style="width: 549px" class="wp-captio

Comments Off on Welding Machines Australia

Mig, Tig and Multi Purpose Welding Machines At tokentools.com.au, we pride ourselves on carrying a large range of welding machines with convenient access to information and sales via the web, we aim to service the entire Australian welding industry. We have selected a range of MIG, TIG, MMA and Multi Purpose inverter-based welding machines ensuring […]

Comments Off on Multi Process Welders

Welding machines with multi-process capability have quickly earned favour amongst welders and it is with good reason as they offer features that do the work of several products. At the core of any modern welding machine is an inverter, simply put, it converts the low frequency 50Hz supply into a high frequency 25 Khz to 150 Khz supply which […]

Comments Off on AC DC Tig Mig Welders For Aluminium Boat Building

Many of the welding machines sold online by Tokentools are used to fabricate components for individuals involved with home projects right up to industrial customers but every now and again we are fortunate to be in the service of skilled legends that possess great knowledge and passion with an inspirational dream that manifests into reality.

<img class="size-full wp-image-621" src="https://www.tokentools.com.au/wp-content/uploads/Arne-boat-build-progressing-in-2012-with-Tokentools-MIG-Welder-atop-the-vessel.jpg" alt="Arne boat build progressing in 2012 with Tokentools MIG Welder atop the vessel" width="1792" height="1344" srcset="https://www.tokentools.com.au/wp-content/uploads/Arne-boat-build-progressing-in-2012-with-Tokentools-MIG-Welder-atop-the-vessel.jpg 1792w, https://www.tokentools.com.au/wp-content/uploads/Arne-boat-build-progressing-in-2012-with-Tokentools-MIG-Welder-atop-the-vessel-150×11

Comments Off on AC DC Tig Welders – Metalmaster Alusync 215 | Aluminium Welding Australia

The ALUSYNC (Alu as in  aluminium and Sync and in Synchronise) AC DC Tig model range has received it’s latest tech upgrade and transitioned into the must have welder for 2017. We are constantly assessing the feedback of our customers and user voice is a powerful tool for driving innovation. We wanted to continue with our direction of […]